In order to connect the FARO laser scanner of the series 3D S or X 130 / X 330 to a mobile device, you need the latest Flash Player. Thus, the first problem would be solved.
Afterwards, you have to activate WIFI in the scanner. Thus, the scanner has an own WIFI network.
Then, you have to connect your device (mobile phone, layptop, etc.) to the network. The keyword for the network is: 0123456789.
If your tablet is connected to the network, you can open a borwser and enter the IP address and the port in the address bar.
There, the following entry is required as standard: 192.168.111.2:8400
Afterwards, a window should open in your browser. There, you should see the same as on the touch screen of your 3D scanner.
Hi,
In order to connect the FARO laser scanner of the series 3D S or X 130 / X 330 to a mobile device, you need the latest Flash Player. Thus, the first problem would be solved.
Afterwards, you have to activate WIFI in the scanner. Thus, the scanner has an own WIFI network.
Then, you have to connect your device (mobile phone, layptop, etc.) to the network. The keyword for the network is: 0123456789.
If your tablet is connected to the network, you can open a borwser and enter the IP address and the port in the address bar.
There, the following entry is required as standard: 192.168.111.2:8400
Afterwards, a window should open in your browser. There, you should see the same as on the touch screen of your 3D scanner.
Best regards
LSE team